Installation
<When the AW-E655 camera is used>
Attach the positioning screw (supplied) to the camera mounting spacer .
Use the 2 screws (supplied) to attach the camera mounting spacer to the fan mounting seat on the top panel of the camera.
Attach the camera mount to the camera mounting spacer using the 2 screws , flat washers and spring washers (supplied).
(Make sure that the two sides of the camera mount are lower than the central area that is attached.)
Attach the lens to the camera. Remove the lens hood and zoom lever.
<When the AK-HC910 camera is used>
Attach the positioning 1 screw (supplied) to the camera mount .
Attach the camera mount to the fan mounting part on the top panel of the camera using the 1 screw , flat washer and spring washer (supplied). (The camera mount points toward the front or back in the opposite way from a convertible camera. For pointing upward or downward, make sure that the two sides of the camera mount are lower than the central area that is attached.)
Attach the lens to the camera. Remove the lens hood and zoom lever.
| | |
|
| |
| | |
|
| |
|
| |
| | |
|
| |
|
|
|
| | |
| ||
|
| |
| | |
|
| |
|
|
|
The camera mount in the opposite direction from when the
To ensure that none of the screws are loose, use a tool to tighten them up securely.
19
