2 Press the + or – button to select the channel number (or frequency).
Pressing the + button cycles the indication in the order shown in the tables in Overview of “Wireless Channel Lists” on page
Channel selection mode | Freqency selection mode |
+ button | – button | + button | – button |
Display example for U68 model
Hold down the button to change the channel number (or frequency) quickly.
3 When the desired channel number (or frequency) appears, turn the POWER switch to OFF to release Setting mode, or press the SET button to continue operations in Setting mode.
The next time you turn on the microphone (by turning the POWER switch to ON), the microphone will enter Transmit mode with the selected channel number (or frequency).
Notes
•The microphone cannot transmit in Setting mode.
•Make sure that the channel selected on the microphone is the same as that selected on the tuner being used in the same system.
•Depending on the noise or interference conditions, all selectable channels may not be usable. If necessary, you can determine which channels are usable by cycling the channel selection through a number of channels on the tuner with the microphone set to OFF. Those channels for which the RF indicator on the tuner does not light are usable.
•The microphone may not operate correctly if it is turned on immediately after being turned off in Setting mode. Wait for a few seconds before turning the power on again.
9US