Symptom | Meaning/Remedy |
|
|
The sound is weak. | • The attenuation level setting is too high. bThe output level is low. Press the – button in attenuation |
| level setting mode to lower the attenuation level. |
| • The volume on the amplifier, mixer or tuner is low. bAdjust the volume. |
|
|
There is distortion in the sound. | The attenuation level setting is too low. bThe input level is extremely high. Press the + button in |
| attenuation level setting mode to raise the attenuation level. |
|
|
There is sound interruption or | • The receiver’s antenna is incorrectly connected. bConnect the antenna correctly according to the |
noise. | operation manual of the tuner or antenna divider. |
| • The antenna divider is turned off. bTurn the antenna divider on. It is possible for the tuner to |
| receive signals even when the antenna divider is turned off, but sound interruption or noise may |
| occur. |
| • The RF indicator lights even when the microphone is off. bJammed transmissions are being |
| received. Determine which channels are usable (i.e., channels for which the RF indicator on the |
| tuner does not light) and set the tuner and microphone to the same usable channel. |
| • Two or more microphones are set to the same channel. bMake sure no two microphones are set to |
| the same channel. Set each microphone to a different channel. |
|
|