Settings

Initiating Setting Mode

Enter Setting mode to change the transmitting channel, the transmitting frequency and the attenuation level, or to reset the accumulated battery use time indication.

To enter Setting mode

While holding down the SET button, turn the POWER switch to ON.

Hold the SET button down until an indication appears on the liquid-crystal display.

The microphone enters Setting mode and the indication before the microphone was previously turned OFF flashes on the liquid-crystal display.

Pressing the SET button cycles the modes in the order of Channel selection mode, Frequency selection mode (page 8), Attenuator adjustment mode (page 10) and Accumulated time indication reset mode (see page 11).

Channel selection mode

Freqency selection mode

 

Press the

Attenuator adjustment

SET button.

mode

 

Accumulated time

 

indication reset mode

Display example

 

 

for U68 model

Changing the Transmitting Channel

The transmitting channel can be selected through either the channel number or the frequency.

1 Set the microphone to Setting mode.

If the channel number (or frequency) indication does not appear, press the SET button until the channel number (or frequency) indication appears.

8US