Parts Identification
4POWER indicator

Lights when the microphone is on.

5POWER switch

Turns the microphone ON or OFF.

When you set this switch to ON without holding down any other button, the microphone enters Transmit mode, and the signal of the selected channel is transmitted.

The HOLD switch appears when the POWER switch is set to ON.

Set the HOLD switch to the lock position to prevent an accidental power cut-off during microphone operation.

Locking the POWER switch

ON

ON

/

6Antenna7Battery holder Insert the battery here.

For details on inserting the battery, see “Power Supply” on page 7.

8+ (+ selection) / – (– selection/reset) buttons

In Setting mode, use these buttons to select the transmitting channel and attenuation level, and use the – button to reset the accumulated battery use time indication to 00:00.

For details on Setting mode, see “Settings” on page 8.

HOLD .

Slide the HOLD switch to the right with a ballpoint pen or similar item.

HOLD .

A yellow mark appears when the switch is in the hold position.

6US