lead) is inserted firmly. The cord is supposed be connected this way. This is not a malfunction. When you connect the power cord, you may hear relay action noise from inside of the player for a short time, even if the player is not turned on. This is because the player is checking the internal status of the player itself. This is not a malfunction.
Note
Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
Setting the HDMI signal output
You can set whether audio signals are output from the HDMI OUT jack or not.
HDMI
Press HDMI.Each time you press HDMI, the HDMI mode is activated or disactivated.
HDMI OFF mode:
The HDMI OUT jack does not output audio signals. “HDMI OFF” appears on the display. Audio signals are output from the ANALOG OUT jacks, PHONES jack, and DIGITAL OUT (CD) jacks (the default setting).
HDMI ON mode:
The HDMI OUT jack outputs audio signals. The HDMI button lights up in green, and “HDMI ON” appears on the display.
Note
•Operate the HDMI button during playback stop.
•Operate the HDMI button when the disc tray is closed.
Started Getting
continued 