Selecting the Playback Layer

When playing a hybrid disc with a Super Audio CD layer and a CD layer (page 8), the player plays the Super Audio CD layer automatically. You can select the CD layer.

SA-CD/CD

SA-CD/CD

Selecting the Playback Area of a Super Audio CD

When playing a disc with the 2-channel playback area and the multi-channel playback area (page 8), you can select the playback area you want to listen to.

You can select the playback area in HDMI ON mode only (page 15).

MULTI/2CH

MULTI/2CH

Press SA-CD/CD in stop mode.

“SA-CD” on the display turns to “CD,” and the CD layer is selected to be played back.

If you press SA-CD/CD again, the Super Audio CD layer is selected.

If you change a disc, the selected playback layer is cleared.

Tip

Since both layers are on one side, it is not necessary to turn the disc over.

Press MULTI/2CH in stop mode.

When the multi-channel playback area is selected, “MULTI” appears on the display. When the 2-channel playback area is selected, “MULTI” disappears.

To play a multi-channel Super Audio CD

Connect the player to a multi-channel amplifier via the HDMI OUT jack.

Set the balance and distance of the speakers on the connected amplifier.

Note

The playback area selected by this operation is valid only for the current disc.

24GB