Preparations

The monitor slides out of the main unit.

Notes

The card remote commander cannot be used for opening up or closing the monitor.

If movement of the monitor during opening or closing has been impeded by the gear shift lever or another obstacle, press OPEN/CLOSE again.

Adjusting the monitor angle

You can adjust the angle of the monitor for best viewing.

Press ANGLE –/+ repeatedly.

The buttons adjust monitor position in discrete steps.

Adjusting the monitor position

You can adjust the monitor position by sliding it forward or backward while pressing SLIDE. When the monitor cannot slide any more, the monitor begins to slide in the opposite direction. Press and hold SLIDE for 2 seconds to slide the monitor back to the other direction when the monitor is in halfway through.

The adjustment is memorized, and the monitor will automatically move to the same position when it is opened up again.

ANGLE –/+

+button: Monitor is tilted backward.

– button: Monitor is tilted forward. The adjustment is memorized, and the monitor will move to the same angle the next time it is opened up again after having been closed.

Notes

Do not move the monitor by hand.

If OPEN/CLOSE was pressed while the monitor was opening or closing, the monitor may not stop at the original angle. In such a case, press ANGLE –/+ to adjust the angle.

SLIDE

Tilting the monitor ahead

In order to operate the button on the dashboard easily, the monitor can be tilted ahead.

Press TILT.

TILT

The monitor will be tilted ahead.

To return to the original position, press TILT again.

Tip

If no operation is made for about 25 seconds, the monitor will return to the original position.

10