
Specifications
AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5 % total harmonic distortion.
CEA2006 Standard
Power Output: 17 Watts RMS ⋅ 4 at 4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
Laser Semiconductor laser
Signal format systemNTSC
Monitor sectionDisplay type Wide LCD color monitor
| Size | 7 in. |
| System | TFT active matrix |
336,960 pixels
DVD/CD Player section100dB
Frequency response10– 20,000 Hz
Wow and flutterBelow measurable limit
Harmonic distortion (DVD)0.01%
Tuner sectionFM
Tuning range87.5- 107.9 MHz
Intermediate frequency10.7MHz/550 kHz
Usable sensitivity9 dBf
Frequency response
30 - 15,000 Hz
Selectivity 75 dB (400 kHz)
| S/N ratio | 64 dB (stereo) |
| 69 dB (mono) |
0.5% (stereo)
0.4% (mono)
Separation 35 dB at 1 kHz
AM
Tuning range
530 - 1,710 kHz
Intermediate frequency
10.8MHz / 450 kHz
Usable sensitivity
30 µV
Amplifier sectionOutputs Speaker outputs (sure seal connectors)
Speaker impedance4 - 8 ohms
Maximum power output50 W ⋅ 4 (into 4 ohms, at 1 kHz)
General
Power requirements
| 12 V DC, from car battery (negative |
| ground) |
| Inputs | Power supply (1) |
| AUX (3) |
Outputs | Front PRE out (1) |
| Rear PRE out (1) |
| Subwoofer (mono) (2) |
| Power antenna relay control lead (1) |
| Power amplifier control lead (1) |
| Rear Monitor OUT (1) |
Tone controls | Bass ±10 dB at 100 Hz |
| Treble ±10 dB at 10 kHz |
| Dimensions | With monitor closed |
| Approx. 178 ⋅ 50 ⋅ 185 mm (7 1/8 ⋅ |
| 2 ⋅ 7 3/8 in.) (W ⋅ H ⋅ D) |
| Mass | Approx. 1.7 kg (3 lb 12 oz) |
Remote commander
Connection box for XM tuner (1) Parts for installation and
connections (1 set) Operating Instructions (1 set)
57