Sony XAV-A1 Displaying the image of the, back camera, Auxiliary Audio/Video Equipment

Auxiliary Audio/Video Equipment

Displaying the image of the

back camera

You can display the image of a back camera (when you connect an optional back camera). Make sure that you have connected the camera cable to the unit’s AUX 3 jack correctly. During the connection of the back camera, set the AUX3 to “Normal” to check the location of the back camera.

If you switch to “Back Camera”, the image of the back camera will be displayed when the back lamp lights up (or the shift lever is set to the “R (reverse)” position).

You can also switch the NTSC/PAL system of the back camera in the AUX3 mode. For details about the function of AUX3 jack and switching NTSC/PAL system, see page 36. For details about connecting the camera cable, refer to the supplied “Installation/ Connections” manual.

Notes

•When you drive, watch the surroundings carefully for your safety. Do not depend on the back camera exclusively.

•If a rear monitor is connected, its display gets black when the shift lever is set to the R position. When the shift lever is set to the other position, the display turns back.

48