Mode Setting
Specifications of the Input/Output
Input Phase Specifications of the External HD/VD
100 0
EVEN,
Non Interlace
External VD
100 100
ODD
External HD
472 472
Unit: Clock 1Clk=33.898 nsec
Make sure that the external HD/VD phases against the standard central phase are as shown in the figure above. Invalid signal input may cause an error in the internal reset.
When you restart/reset the camera or operate the camera by inputting an external trigger shutter pulse, the Vsync signal for the image is output 1 H later from the external VD.
1N: Consecutively operated with 32 ∝s HD frequency and 20 ms VD frequency. (See the above figure for the phase timing).
2I: Consecutively operated with 32 ∝s HD frequency and 10 ms VD frequency. (See the above figure for the phase timing).
Restart/Restart and /External trigger shutterConsecutively operated with 32 ∝s HD frequency. VD (Reset) is on any timing as long as the HD phase is within the range described above.
8