Programming the CD

tracks

You can arrange the order of the tracks on a disc and create your own programme. The programme can contain up to 24 tracks.

1 Press PLAY MODE repeatedly until “PROGRAM” appears in the display before you start playing.

2 Turn lAMSLuntil the track you want appears and push lAMSLto select the track.

The track number that you programmed, the playing order, and the total playing time appear in the display.

If you’ve made a mistake

Press CLEAR, then repeat Step 2.

Tip (CDP-XE570/XE370 only)

You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9).

3 Repeat Step 2 to programme the tracks in the order you want.4 Press Hto start Programme Play.To cancel Programme Play

Press PLAY MODE.

Tips

• The programme remains until erased or until you

Checking the track order (CDP-XE570/XE370 only)

You can check your programme before or after you start playing.

Press CHECK.

Each time you press this button, the display shows the track number in the programmed order. After the last track in the programme, the display shows “ - END -” (or “ End” for CDP- XE370) and returns to the original display. If you check the order after you start playing, the display shows only the remaining track numbers.

Changing the track order

You can change your programme before you start playing.

To

You need to

Erase a track

Press CHECK until the track you

 

don’t want appears in the display,

 

then press CLEAR (CDP-XE570/

 

XE370 only).

 

Erase the last track Press CLEAR. Each time you

in the programme

press the button, the last track will

 

be cleared.

 

 

Add tracks to the

Turn lAMSLuntil the

end of the

track number you want to add

programme

appears, then push

 

lAMSL.

 

When using the remote, press the

 

number buttons of the tracks to be

 

added (CDP -XE570/XE370

 

only).

press AOPEN/CLOSE. The programme you have

created remains even after the Programme Play

mode ends or you select another play mode.

• For the recording to the A side or B side of the

cassette tape, you can pause Programme Play.

Notes

•The total playing time doesn’t appear in the display when it exceeds 100 minutes.

•If you programme a track numbered over 24 (or 68 for the CDP-XE370/XE270), “– –.– –appears” instead of the total playing time.

•“PROGRAM FULL” (or “ FULL” for the CDP- XE370/XE270) appears in the display when you try to add a track to a programme which already contains 24 tracks.

Change the whole programme completely

Hold down CLEAR until

“CLEAR” (for the CDP-XE570) or “ CLEAr” (for the CDP-XE370/ XE270) appears in the display. Create a new programme following the programming procedure.

12GB