Adjusting the Recording
Level (Peak Search)
The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
1 Before you start playing, press PEAK SEARCH.
“ PEAK” flashes in the display and the player starts scanning the disc searching for the highest peak level.
After scanning all the tracks, the player repeats the portion with the highest peak level.
2 Adjust the recording level on the deck.
3 Press xon the player to stop Peak Search.
“ PEAK” disappears from the display.
Note
The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.
Recording a CD by Specifying Tape Length (Time Edit) (continued)3 Press TIME EDIT to have the player create the programme.

The display shows the tracks to be recorded. “ TAPE B” flashes in the display.

4 When you record on both sides of the tape, press TIME EDIT again.

The player inserts a pause, then creates the programme for side B. The display shows the programmed tracks.

When you record on one side of the tape or on a DAT or MD, skip this step.

5 Start recording on the deck and then press Hon the player.

When you record on both sides of the tape, the player pauses at the end of the programme for side A.

6 Reverse the tape to side B and pressHor Xon the player to resume playing the remaining tracks.To cancel Time Edit

Press PLAY MODE.

When using the remote, press CONTINUE.

Tips

•You can set the tape length freely using lAMS L.

Example: When the tape length of one side is 30 minutes and 15 seconds

1To set the minutes, turn lAMS Luntil “ 30” appears in the display, then pushlAMS L.

2To set the seconds, turn lAMS Luntil “ 15” appears in the display, then pushlAMS L.

•To check and change your programme, see page 12.

14GB