13
EN
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2Press (PTY/LIST) repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select “NONE” (Not specified) for
searching.
3Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds. “NO” and the programme type
flash for five seconds if the unit cannot find
the programme type. It then returns to the
previous station.

Setting the clock

automatically

The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1Press (SHIFT), then press (2) (SET UP)
repeatedly until “CT” appears.
2Press (4) (n) repeatedly until “CT on”
appears.
The clock is set.
3Press (SHIFT) to return to the normal
display.
To cancel the CT function
Select “CT off” in step 2 above.
Notes
•The CT function may not work even though an RDS
station is being received.
•There might be a difference between the time set by the
CT function and the actual time.
PTY

SPORT

SUR EQ
RDS/Other Functions
Set

CT off

SETUP
SUR EQ
Set
CT on
SETUP
SUR EQ
Other Functions

Using the rotary remote

The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD and MD
changer with the rotary remote.
By pressing the button
(the SOURCE button)
Each time you press (SOURCE), the source
changes as follows:
Tuner n CD n MD n Tape
Pressing (MODE) changes the operation in
the following ways
• the tape transport direction
• the band: FM1 n FM2 n MW n LW
• the CD changer: CD1 n CD2 n ....
• the MD changer: MD1 n MD2 n ....
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
(SOURCE)
(MODE)
continue to next page n