Sony XR-C750RDS, XR-C850RDS, XR-C850RW Presetting the RDS stations with the AF and TA data, Recording the traffic announcements

11
EN
Presetting the RDS
stations with the AF and
TA data
When you preset the RDS stations, the unit
stores each station’s data as well as its
frequency, so you don’t have to turn on the AF
or TA function every time you tune in the
preset station. You can select a different setting
(AF, TA, or both) for each preset station, or the
same setting for all preset stations.
Presetting the same setting for all
preset stations
1Select an FM band.
2Press (AF/TA) repeatedly to select either
“AF on,” “TA on” or “AF TA on” (for both
AF and TA functions).
Note that selecting “AF TA off” stores not
only RDS stations, but also non-RDS
stations.
3Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “B.T.M” appears.
4Press (4) (n) until “B.T.M” flashes.
5Press (SHIFT).
Presetting different settings for
each preset station
1Select an FM band, and tune in the
desired station.
2Press (AF/TA) repeatedly to select either
“AF ON,” “TA ON” or “AF TA ON” (for
both AF and TA functions).
3Press the desired number button for two
seconds until “MEM” appears.
Repeat from step 1 for presetting other
stations.
Tip
If you want to change the preset AF and/or TA setting
after you tune in the preset station, you can do so by
turning on/off the AF or TA function.
RDS
Recording the traffic
announcements
—Traffic Information Replay (TIR)
You can listen to the latest traffic
announcements by recording them. The unit
automatically records and stores up to eight
traffic announcements. If the recording
exceeds eight minutes (XR-C850RW/
C850RDS), or four minutes (XR-C750RDS), the
recorded announcements are updated, so you
can always hear the latest information.
The TIR function turns on the unit
automatically and records the traffic
announcements for up to two hours before and
after a preset time.
Presetting the time and the station
1Press (TIR) for two seconds until “TIR”
lights up in the display.
2Press (4) (n) repeatedly until “TIRon”
appears.
3Press (TIR) repeatedly until the time
indication appears.
1Set the hour by rotating the dial.
2Press (4) (n) until the minute digits
flash.
3Set the minute by rotating the dial.
4Press (TIR).
5Select the desired station by pressing the
preset number button or either side of
(SEEK/AMS).
TIR
7:‚‚
SUR EQ
TIR
1‚:‚‚
SUR EQ
TIR
1‚:‚‚
SUR EQ
TIR
1‚:1‚
SUR EQ
TIR
TIR on
SUR EQ
continue to next page n