Sony XR-C750RDS, XR-C850RDS, XR-C850RW Locating a disc by name, Selecting the specific tracks for playback

20
EN
Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a personalized name. For
more information on disc names, refer to
“Labeling a CD” (page 19).
1Press (PTY/LIST) momentarily.
The names assigned to the disc currently
playing and the next disc to be played
appear in the display. The name assigned to
currently playing disc is flashing.
If you add disc memo labels to a CD-TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD-TEXT or disc memo labels ), that
information will be displayed regardless of the
display setting you make.
2Press (PTY/LIST) repeatedly until you
find the desired disc.
3Press (5) (ENTER) to play back the disc.
Notes
•To go back to the normal display, press (DSPL). Once a
disc name has been displayed for five seconds, the display
goes back to the normal playback mode.
•The track names are not displayed during MD playback.
•If there are no discs in the magazine, “NO Disc” appears
in the display.
•If a disc has not been assigned a custom file, “********”
appears in the display.
•If the disc information has not been read by the unit, “?”
appears in the display. To load the disc, first press a
number button, then choose a disc that has not been
loaded.
•The information appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback
— Bank/Custom File
(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
LST
4 SCHUBERT
ENTER
SUR EQ
CD1
4 SCHUBERT
NAMEDISC
SUR EQ
Displaying the disc memo
During playback, press (DSPL).
Each time you press (DSPL) during CD
playback, the item changes as follows:
z Elapsed playback time z Disc name∗1
Clock Z Track name∗2 Z
∗1When you connect an optional CD changer with the
CD-TEXT function, the personalized label or the CD-
TEXT disc name appears. See below to change the
display.
- To change the displayed item press (4) (n).
-To change the display using Display settings
(page 15).
The display item will change depending on the setting
as follows.
A: CD-TEXT disc with disc memo
B: Normal CD with disc memo
C: CD-TEXT disc without disc memo
D: Normal CD without disc memo
∗2If you connect an optional CD changer with the CD-
TEXT function, the CD-TEXT information will appear
on the display when you playback a CD-TEXT disc.
Erasing the disc memo
1Press (SOURCE) repeatedly to select CD.
2Press (MODE) repeatedly to select the CD
changer.
3Press (PTY/LIST) for two seconds.
4Press (DSPL) for two seconds.
“Delete” and the disc memo appear in the
display.
5Rotate the dial to select the name you
want to erase.
6Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7Press (PTY/LIST) for two seconds.
The unit returns to the normal CD playback
mode.
Type of
disc
A
B
C
D
Priority display
setting
D.MEMO
CD-TEXT
D.MEMO
CD-TEXT
D.MEMO
CD-TEXT
D.MEMO
CD-TEXT
Actual display
Disc memo
CD-TEXT information
Disc memo
CD-TEXT information
NO D. Name