19
EN
Track slot number
2Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3Press either side of (SEEK/AMS) to select
the track you want to insert.
4Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “Mem full” appears in
the display, and you cannot insert tracks.
5When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
6Press (SHIFT).
Erasing the tracks in the
programme
1Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
To select Programme 2, press (4) (n)
repeatedly until “P2” appears.
2Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4To continue erasing tracks, repeat steps
2 and 3.
CD1

2 4 P1.‚6

PLAYMODE
TRACKDISC
SUR EQ
Track Slot Number
DEL
- -- P1.‚6
PLAYMODE
TRACKDISC
SUR EQ
CD/MD Changer
5When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6Press (SHIFT).
Labeling a CD
— Disc Memo/Custom File
(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name (page 20) and select the specific tracks
for playback (page 20).
1Play the CD and press (PTY/LIST) for two
seconds.
2Enter the characters.
1Rotate the dial clockwise direction to
select the desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + nn * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters appear in reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3Repeat steps 1 and 2 to enter the
entire name.
3To return to the normal CD playback
mode, press (PTY/LIST) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for each
character.
CD1
4 ________
NAMEDISC
SUR EQ
CD1
4 S_______
NAMEDISC
SUR EQ
CD1
4 S_______
NAMEDISC
SUR EQ
CD1
2 4 P1.‚2
PLAYMODE
TRACKDISC
SUR EQ