8
EN
Memorising only thedesired stations
You can store up to 10 stations on each band
(20 for FM 1 and FM 2, 10 for MW or LW) in
the order of your choice.
1Press (SOURCE) repeatedly to select the
tuner.
2Press (MODE) repeatedly to select the
desired band.
3Press either side of (SEEK/AMS) to tune
in the station you want to store on the
number button.
4Keep the desired number button ((1) to
(10)) pressed until “MEM” appears in the
display.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Receiving the memorisedstations
1Press (SOURCE) repeatedly to select the
tuner.
2Press (MODE) repeatedly to select the
desired band.
3Press the number button ((1) to (10))
momentarily where the desired station is
stored.

If you cannot tune in a preset

station

Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly until
“Local” (local seek mode) appears. Then press (4) (n) to
select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will be
tuned in.
Tip
If you know the frequency of the station you want to listen
to, press and hold down either side of (SEEK/AMS) for a
few seconds until the desired frequency appears (manual
tuning).

If FM stereo reception is poor

— Monaural Mode

1Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “Mono” appears.
2Press (4) (n) repeatedly until
“Mono on” appears.
The sound improves, but becomes
monaural (“ST” disappears).
3Press (SHIFT).
To go back to the normal mode, select “Mono
off” in step 2 above.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
Station name ˜ Clock