Sony CX350 Batteries/power sources, Menu settings have changed automatically, +/- marks p, Sensor

The menu settings have changed automatically.

The following menu items return to the default settings in more than 12 hours after you close the LCD screen.

[SCENE SELECTION] [WHITE BAL.] [SPOT MTR/FCS]

[SPOT METER]

[SPOT FOCUS] [EXPOSURE] [FOCUS] [LOW LUX]

[BLT-IN ZOOM MIC]

[MICREF LEVEL] [AUTO BACK LIGHT]

[DROP SENSOR] (HDR-XR350E/XR350VE)

The following menu items return to the default settings when you switch between movie recording and photo recording and playback modes.

[FADER] [TELE MACRO] [SELF-TIMER]

Your camcorder gets warm.

Your camcorder may become warm during operation. This is not a malfunction.

The supplied Wireless Remote

Commander does not function.

Set [REMOTE CTRL] to [ON] (p. 84). Insert a battery into the battery holder with the +/– polarities correctly matching the

+/– marks (p. 116).

Remove any obstructions between the Wireless Remote Commander and the remote

sensor.

Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Wireless Remote Commander may not function properly.

GB

Another DVD device malfunctions when you use the supplied Wireless Remote Commander.

Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your DVD device with black paper.

Batteries/power sources

The power abruptly turns off.

Use the AC Adaptor.

In the default setting, when about 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off (A.SHUT OFF). Change the setting of [A.SHUT OFF] (p. 83), or turn on the power again.

Charge the battery pack (p. 12).

The /CHG (flash/charge) lamp does not light while the battery pack is being charged.

Close the LCD screen (p. 12).

Attach the battery pack to the camcorder correctly (p. 12).

Connect the power cord (mains lead) to the wall outlet (wall socket) properly.

The battery charge is completed (p. 12).

The /CHG (flash/charge) lamp flashes while the battery pack is being charged.

If the temperature of the battery pack is too high or too low, you may not be able to charge it (p. 105).

Attach the battery pack to the camcorder correctly (p. 12). If the problem persists, disconnect the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery pack may be damaged.

86