Note
When
Tips
•If you made a mistake, press CANCEL. The track programed last will be cleared. Re- program it.
•To check the order of tracks, press ENTER• MEMORY CHECK after step 6 until “CHECK” appears in the display. Press =or +to display the track number in the programmed order.
•To check the total recording time on the upper side and the reverse side:
Press DISPLAY before starting recording. Each time you press the button, the display changes as follows:
“total recording time on the upper side” n
“total recording time on the reverse side” n “total track number and the tape length you need to record the whole CD.
3 Press =or +to select the track you want to program, and press ENTER•MEMORY CHECK. Repeat this step.
The total number of
programed tracks and the minimum tape length
(unit: 2 minutes, up to 98 minutes) you need to record the programed tracks appear in the display.
Example: The total tape length needed to record | The | ||||||||
the entire CD is “24” minutes. The maximum |
| ||||||||
recording time for each side is 12 minutes. |
|
| Tape | ||||||
Track Nos.: 1 | 2 | 3 | 4 | 5 | 6 |
| 7 | ||
|
| ||||||||
Length: | 05:10 | 01:20 | 04:50 | 02:30 | 02:30 | 01:30 | 04:20 | Player | |
(minutes) | Side A (11:20) |
| Side B (10:50) |
|
| ||||
|
|
|
| ||||||
4 Press ENTER•MEMORY CHECK.
5 To change the recording time, press =or +. If you do not change the recording time, skip to step 6.
Example: If you input “40” minutes for the recording time, the maximum recording time for each side is 20 minutes.
Track Nos.: 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| |
Length: | 05:10 | 01:20 | 04:50 | 02:30 | 02:30 | 01:30 | 04:20 | |
(minutes) |
| Side A (17:50) |
|
|
|
| ||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
Side B (4:20)
6 Press ENTER•MEMORY CHECK.
7 Insert a blank tape into the tape compartment.
8 Press r/Pand then (.
Recording will start on the upper side automatically. The tracks are recorded in the programed order.
continued
TheTapePlayer 25