Tip
To record a track from a number of different CDs, EDIT 1TRACK is useful (page 26).
1Make connections.
2Turn on this player and the connected component.
3Do steps 2 through 4 on pages 26 and 27.
4Make the connected component ready for recording.
5Start playing a CD on this player.
Tip
You can record the sound of the connected component. Insert a blank tape into the tape compartment, and press r/Pthen TAPE((page 11).
1 Remove the jack cover from the OPTICAL DIGITAL OUT (CD) jack of this player and connect the jack with the digital input jack of the MiniDisc recorder or other component using the digital connecting cable (not supplied) .
2 Turn on the power of this player and the connected component.
3 Make the connected component ready for recording.
4 Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/ | Setting | ||
Up | |||
recorder | Rear panel of this | ||
| |||
|
| ||
| player |
| |
TV, VCR, MiniDisc |
|
| |
player/recorder, |
|
| |
etc. | to LINE IN jack |
| |
to line |
| ||
Audio connecting |
| ||
output jack cable |
| ||
| For MiniDisc recorder: |
| |
|
| ||
| (not supplied) |
| |
| For MiniDisc recorder: |
| |
|
| ||
| (not supplied) |
| |
1 Connect the LINE IN jack of this player with the line output jack of the MiniDisc player or other component using the audio connecting cable (not supplied) .
2 Turn on the power of this player and the connected component.
3 Press MD (LINE) and start playing sound on the connected component.
The sound from the connected component is output from the speakers.
continued
SettingUp 37