Radio
Tape Player
Timer
Symptom | Remedy |
The picture of your TV becomes | • If you are listening to an FM program near the |
unstable. | TV with an indoor antenna, move the player |
| away from the TV. |
The tape does not move when you | • Insert the tape properly and close the tape |
press an operation button. | compartment securely. |
| • Replace all the batteries with new ones. |
|
|
The r/Pbutton does not | • Make sure the safety tab of the tape in the tape |
function/The tape does not play. | compartment is in place. |
| • Press pon the TAPE section to switch the |
| function of the player to “TAPE”. |
|
|
The tape does not erase completely. | • Clean the erasing heads (see page 45). |
| • The source which was recorded on TYPE II |
| (high position) or TYPE IV (metal) tape using |
| this unit is being played. Record on TYPE I |
| (normal) tape and play. |
|
|
The tape does not record. | • Make sure the tape is inserted properly. |
| • Make sure the safety tab of the tape in the tape |
| compartment is in place. |
|
|
The audio is weak/The audio | • Clean the heads, pinch rollers and capstans (See |
quality is poor. | page 45). |
| • Demagnetize the heads using a demagnetizer |
| (see page 45). |
|
|
The tape player cannot be paused | • The tape player can be paused during recording |
during playback. | only. |
The timer does not operate. | • Make sure the time on the clock is correct. |
| • Replace all the batteries in the player including |
| the |
| weak. |
| • Check to see if the AC power had been cut off. |
| • Make sure the tape has not wound to the end. |
| • Make sure the t(clock) indication is displayed. |
continued
AdditionalInformation 43