Waking up to music (continued)

Tip

If you made a mistake, press CANCEL. The setting entered last will be cleared. Re-enter it.

Tips

•To exit the standby mode, press STANDBY to make the t indication disappear.

•The preset settings remain until you reset them.

•The display window does not light while the waking up timer is on.

4 Set the timer to the hour and the minutes you want the music to go on.

1Press TUNING

TIME SET + or – to set the hour and press

ENTER•MEMORY

CHECK.

2Press TUNING TIME SET + or – to set the minutes, and press ENTER•MEMORY CHECK.

5 Set the timer to the hour and the minutes you want the music to go off (Do as step 4.).

6 Press TUNING TIME SET + or – to set the volume you want, and press

ENTER•MEMORY CHECK.

7 Press STANDBY.

The tindication lights up and the power goes off; the player enters the standby mode.

At the preset time, the power will go on and music will play. Then the power will go off at the preset time, and the player will enter the standby mode again.

To check/change the waking up timer settings

Press TIMER, then ENTER•MEMORY CHECK. Each time you press ENTER•MEMORY CHECK, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and reenter it.

To use the player before a timer playback starts

If you turn on the player, you can use it as usual ( in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 29, you will hear that station at the preset time.) Turn off the player before the preset time.

To stop play

Turn off the power.

30TheTimer