To answer a call using voice commands

When the phone rings, say “Answer” and the call is connected.

To reject a call using voice commands

When the phone rings, say “Busy”. The call is rejected. The caller is diverted to voicemail, if activated, or hears a busy tone.

Editing your voice commands

You can edit all your voice commands saved in Contacts. Select the contact you want to edit a voice command for } More } Edit contact. Scroll to the relevant tab and edit your voice command.

To re-record a voice command1} Settings } the General tab } Voice control } Voice dialling } Edit names.

2Select a voice command } More

} Replace voice.

3Wait for the tone and say the command.

Calling

Tips when recording and using voice commands

If your phone cannot detect your voice command, one of the following might have happened:

You spoke too softly – try speaking louder.

You held the phone too far away – hold it as you do during a call.

The voice command was too short – it should be around one second long and more than one syllable.

You spoke too late or too soon – speak immediately after the tone.

You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.

You used another intonation – use the same intonation as in the recorded voice command.

29

This is the Internet version of the user's guide. © Print only for private use.