To reject a call using voice commands

When the phone rings, say “Busy”. The call is rejected. The caller is diverted to voicemail, if activated, or hears a busy tone.

Editing your voice commands You can edit all your voice commands saved in Contacts. Select the contact you want to edit a voice command for } More } Edit contact. Scroll to the relevant tab and edit your voice command.

Calling

The voice command was too short – it should be around one second long and more than one syllable.

You spoke too late or too soon – speak immediately after the tone.

You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.

You used another intonation – use the same intonation as in the recorded voice command.

To re-record a voice command1} Settings } the General tab } Voice control } Voice dialling } Edit names.

2Select a voice command } More

} Replace voice.

Diverting calls If you cannot answer incoming calls, you can divert them to another number, for example, your answering service.

3Wait for the tone and say the command.

When the Restrict calls function is activated, some Divert calls options are not available.

Tips when recording and using voice commands

If your phone cannot detect your voice command, one of the following might have happened:

You spoke too softly – try speaking louder.

You held the phone too far away – hold it as you do during a call.

You can choose between the following divert options:

Divert always – divert all calls.

When busy – divert calls if you are already on the phone.

35

This is the Internet version of the user's guide. © Print only for private use.