Calling

Voice answering

You can answer or reject incoming calls by using your voice, when using a portable or car handsfree kit.

You can only use a MIDI, WAV, EMY or IMY file as a ringtone with voice answering.

To activate voice answering and record voice answer commands1} Settings } the General tab } Voice control2 } Voice answer } Activate.

3 Instructions appear. }Continue. Wait for the tone and say “Answer”, or another word. If the recording sounds ok } Yes. If not } No and

repeat step 2.

4 Say “Busy”, or another word } Yes.

5 Instructions appear. } Continue and select the environments in which you want voice answering to be activated. You can select several alternatives.

To answer a call using voice commands

When the phone rings, say “Answer” and the call is connected.

To reject a call using voice commands When the phone rings, say “Busy”. The call

is rejected. The caller is diverted to voicemail, if activated, or hears a busy tone.

Editing your voice commands

You can edit all your voice commands saved in Contacts. Select the contact you want to edit a voice command for } More } Edit contact. Scroll to the relevant tab and edit your voice command.

To re-record a voice command1} Settings } the General tab } Voice control } Voice dialling } Edit names.

2Select a voice command }More }Replace voice.

3 Wait for the tone and say the command.

Tips when recording and using voice commands

If your phone cannot detect your voice command, one of the following might have happened:

You spoke too softly – try speaking louder.

You held the phone too far away – hold it as you do during a call.

The voice command was too short – it should be around one second long and more than one syllable.

26

This is the Internet version of the user's guide. © Print only for private use.