Sony Ericsson T20e - page 20

20
UU
UUss ssee eerr rr IIIInn nnttttee eerr rraa aacc ccttttiiiioo oonn nn WW WWiiiitttthh hh SS SSIIIIMM MM AA AATT TT
DISPLAY TEXT A text string of up to 160 characters (80 UCS coded) is supported.
Text clearing times 10-20 seconds. 60-second timeout limit for the user to clear the text.
‘Key’ responses ‘Long NO’ – Proactive session terminated by user.
‘NO’ – Backward move in proactive session.
Any other key clears display if the command is performed success-
fully.
GET INKEY Prompt for a one character input. Pressing ‘YES’ without entering a
character gives warning message “Minimum 1 character”.
‘Key’ responses ‘CLR’ clears current character.
‘Long NO’ terminates the proactive session.
‘NO’ – Backward move in proactive session.
‘YES’ – Command performed successfully.
GET INPUT Prompt for character input. Pressing ‘YES’ without entering a charac-
ter gives warning message “Minimum ‘no’ characters”. The phone will
refuse to accept further input when maximum response length is
exceeded.
MMI Maximum Response lengths
Digits Only – xx characters
SMS default alphabet characters – 160 characters
Hidden Characters (Digits Only) – 20 characters
‘Key’ responses ‘CLR’ clears current character/characters.
‘Long No’ terminates the proactive session
‘NO’ – Backward move in proactive session
‘YES’ – Command performed successfully
SET UP CALL General: Capability configuration
Setup speech call CallParty
Subaddress
DTMF support
Yes
No
Yes
'00' = set up call, but only if not currently busy
on another call;
Yes
'01' = set up call, but only if not currently busy
on another call, with redial;
Yes
'02' = set up call, putting all other calls (if any)
on hold;
Yes
'03' = set up call, putting all other calls (if any)
on hold, with redial;
Yes
'04' = set up call, disconnecting all other calls
(if any);
Yes
'05' = set up call, disconnecting all other calls
(if any), with redial;
Yes
SET UP MENU Yes
SMS PP DOWNLOAD Yes
START MENU Yes
Service Mode Support
in T20e