Connections
Rear Panel Spectralizer
Before connecting the SPECTRALIZER switch the power off at all connected units.
The rear panel provides AES/EBU- and
The SPECTRALIZER operates with 24 bit word width. It accepts 16 bit and 20 bit inputs and will create output signals accor- ding to the input resolution.
For synchronisation purposes WORDCLOCK IN and WORDCLOCK THROUGH BNC connectors are fitted with a switchable 75 Ohm termination.
MIDI IN and MIDI THROUGH connectors allow presets to be selected via MIDI program change commands.
For easy upgrade of future software releases, the rear panel offers
Installing Updates:
Note: All presets will be lost after installing a new software version!
1.Connect your computer with the SPECTRALIZER via a serial port with a standard
2.Open a terminal program like “Hyperterminal” on PC and make the following adjustments:
Baud rate: 9600; Stop bit: 1; Parity: none; Data bit: 8;
Handshake: no; Transfer mode: ZMODEM
3.Switch on the SPECTRALIZER and depress both
PRESET UP and PRESET DOWN until the
4.Load the update file into your terminal program and send it to the SPECTRALIZER. The
5.After successfully installing the new software version the
6.Switch the SPECTRALIZER off and on. The new software version number is displayed in the first INFO page (simultaneously depress STORE and APPLY; also refer to CONTROL ELEMENTS No. 9, INFO).
7.If an error occurred during download the
for a new download. Please check all adjustments on your terminal program and try again. If you are still unsuccessful contact your local dealer.
6 | Spectralizer |
