Sound Performance Lab 9631 manual Density LC-display Solo Kick Preset

DENSITY increases the loudness of the generated harmonics by applying different “compression ratios”. The control offers six positions.

Adjustment: If DENSITY is set to 0, the generated harmonics have low intensity even at high values for 2ND and 3RD HARMONIC. The increase in high frequencies is mostly created by the highpass filtering, which applies a shelving equalizing above the adjusted FREQUENCY encoder (see FREQUENCY, 3).

Increasing DENSITY to 1 or 2 will increase audibility of the generated harmonics. High DENSITY values (4 to 6) may lead to audible distortion depending on the source material. Use the SOLO function (see 9) to hear the harmonics in isolation.

The LC-display shows all encoder settings.

More information is displayed when activating the INFO pages (see 9). Press STORE and APPLY for one second to enter the INFO pages.

The SOLO function switches the original input off. You will hear the effect signal only to be able to monitor the highpass-filte- ring and harmonics generation.

The KICK function boosts the amplitude of the generated harmonics in the event of creation (attack-period). After that the amplitude drops back to its original value. KICK should be used when you want to apply additional “sparkle” and presence to the signal.

The SPECTRALIZER allows you to store up to 99 presets, which can be changed by MIDI program change command.

If you want to store a new adjustment, depress STORE for one second. The LED starts to flash indicating that the STORE mode has been activated. The LC-display now shows the actual preset number. Use UP and DOWN to select a new preset location. The status-LED flashes shortly to indicate that the input (depressing UP or DOWN) is accepted. Keeping UP or DOWN depressed will let you jump through the preset list in steps of 5 presets. Once a new preset location is found depress STORE again. The STORE LED goes out. The preset is stored at the new location.

In case you want to quit the STORE mode without storing the new adjustments simply press APPLY.

7Density

8LC-display

9 Solo

10 Kick

11Preset

Storing a preset: Depress STORE for1 sec., LED flashes;

use UP/DOWN to select preset no.;

depress STORE again, LED goes out

Control Elements

Spectralizer 11