Soundstream Technologies 501 Sample Wiring Diagram, Remote Turn-On, Signal Cable, Speaker Cable

REMOTE TURN-ON

Connect the “Remote” line to the turn-on lead from the source unit. When+I2 Volts is received, the amplifier will turn on.

SIGNAL CABLE

Use a high quality cable that will be easy to install and has minimal signal loss to guarantee optimum performance.

SPEAKER CABLE

The RUBICON amplifiers will accept up to 8 gauge speaker cable. Use a high quality, flexible, multi-strand cable for best performance and longevity.

SAMPLE WIRING DIAGRAM

r-

I	+12v GND	REMOTE
1	FUSES

To Chmds

ToRemde

TO+lfB Turn-on

r

		r HAwKlNs		1			1110 1PORT
- +	X-OVER	FREQ	BOOST		LEVEL	INPUT

I ,

f-

1 Head Unit 1

B/O Port Bridging Option

The RubiconSOl/ amplifier has the ability to be bridged to another identical amplifier for double the output by using the BIO Port. When this feature is used, the master amplifier’s level and crossover switches affect both amplifiers (the slave amplifier’s controls are totally bypassed). By switching the phase switch to 180 on the slave amplifier and connecting a RCA cable from the 501/ OUT on the master amplifier to the 5011lN on the slave amplifier both amplifiers are synchronized. Then connect a positive speaker cable to the master amplifier’s positive speaker terminal and the other speaker cable to the slave amplifier’s Fpositivenal lterminalyc o.n n e c t t h e s p e a k e r wires to a single load no less than 2 ohms. This will supply twice the power of a single amplifier.

12