Southbend EZ-3, EZ-5 manual Idle Element Resistance Check

TROUBLESHOOTING

TROUBLESHOOTING MODEL EZ-3 & EZ-5 COUNTERTOP STEAMERS

Figure 9

Idle Element Resistance Check

Model EZ-3 Model EZ-5

High Limit

Idle Element Plug

1.Disconnect power at circuit breaker.

2.Remove control panel.

3.Disconnect idle element plug (PL3).

4.Place test leads as shown above.

5.Check to see if resistance is within +/- 10% of values in the following table:

	Model EZ-3	Model EZ-5
Voltage	Resistance (Ohms)	Resistance (Ohms)
208	115	87
220	129	97
240	154	115
380	385	289
415	459	344
480	614	461

6. Remove one test lead, place on ground, check for short circuit.

PAGE 26 OPERATOR’S MANUAL 1178387 REV 2