Southbend EZ-5 manual Time Delay Relay Check EZ-3 only

Models: EZ-5 EZ-3

1 42
Download 42 pages 46.22 Kb
Page 31
Image 31

MODEL EZ-3 & EZ-5 COUNTERTOP STEAMERS

TROUBLESHOOTING

Figure 14

Time Delay Relay Check (EZ-3 only)

1.Disconnect power at circuit breaker.

2.Remove control panel, but leave plugged in.

3.Disconnect wire C23 from terminal block position 3.

4.Reconnect power.

5.Depress and hold door switch. Contactor should actuate and then deactuate in approximately 60 seconds.

6.If contactor fails to actuate or actuates but fails to deactuate, check potentiometer on top of time delay relay. Make sure potentiometer is seated properly on time delay relay terminal and make sure it is set to 60.

7.Depress door switch again. If contactor still fails to actuate and deactuate properly, replace time delay relay.

TROUBLESHOOTING

OPERATORS MANUAL 1178387 REV 2

PAGE 31

Page 31
Image 31
Southbend EZ-5 manual Time Delay Relay Check EZ-3 only