REDIAL BUTTON
1.If the number you dialed is busy, or you want to call the last number dialed again, press and release the hook switch for a new dial tone.
2.Press REDIAL. The number will appear on the display window.
3.The last number called will automatically be redialed.
HOLD BUTTON
1.To place a call on hold, press the HOLD button and hang up the handset. The HOLD INDICATOR will light up and remain lighted until you resume your conversation.
2.To resume your conversation, lift the handset or that of any extension phone on the same line or press and release HOLD. The HOLD indicator will go out and your call can continue.
FLASH BUTTON
This telephone provides a break signal for a PABX service of Call Waiting from your local telephone company. If you have Call Waiting service, you can operate the Call Waiting function per the following instructions.
1.While having a conversation, another party calls and you hear a tone.
2.Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered.
3.Press FLASH again and release. The first caller can be spoken to again and the second call is placed on hold.
NOTE: If you also have subscribed to Call Waiting Caller ID service, please see
Call Waiting Display below.
CALL WAITING DISPLAY
In the past, if you had call waiting service, a tone alerted you there was a new call coming while you were on an existing call.
Now our Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before you answer it. The call waiting information will be shown on the unit’s display.
13
