Dial tone is OK, but can’t dial out
Handset does not ring
# button does not work
You experience static, noise, or fading in and out
—Is the base power cord connected to a working outlet?
—Is the PHONE light on?
—Is the telephone line cord connected to the base unit and the wall jack?
•Disconnect the base from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local service.
•Is the handset out of range of the base?
•Make sure the battery is properly charged (12 hours).
•Is the battery pack installed correctly?
•Did the handset beep when you pressed the PHONE button? Did the
•Make sure the TONE/PULSE switch on the base is correctly set.
•Make sure the RINGER switch on the handset is turned to ON.
•You may have too many extension phones on your line. Try unplugging some phones.
•See solutions for “No dial tone.”
•Make sure phone is set to TONE.
•Change channels
•Is handset out of range? Move closer to the base.
2 5
