Southwestern Bell 2-9773 manual Telephone Setup, Setting the Area Code for Caller ID

TELEPHONE SETUP

After charging the handset for an initial 12 hours:

1.Set the PULSE/TONE switch to TONE for touch-tone service or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

2.Plug the telephone line cord into the base and into a modular jack.

3.Turn on the RINGER switch so the handset rings for incoming calls.

	3
2	RINGER
1	switch

PULSE/TONE switch

SETTING THE AREA CODE FOR CALLER ID

Setting your area code is necessary for proper caller ID operation.

Once you set the code, the phone will automatically remove it from local calls within your area before it stores the number in memory. This will enable you to use the Redial feature more efficiently because you will not have to remove the code each time you call that number.

To set your area code:

1.Make sure the phone is OFF.

2.Press ENTER. The Caller ID display on the handset prompts you to enter your area code.

3.Enter your 3-digit area code by pressing the appropriate number keys. The phone emits 2 beeps to confirm it has accepted the area code entry.

4.To change or enter your area code again, follow steps 1-3 above.

1 0