| • Does the base need to be relocated? |
| • Charge battery. |
| • Make sure base is not plugged into an outlet |
| with another household appliance. |
Unit beeps | • Place handset in base for 20 seconds to reset |
| the security code. If that doesn’t work, charge |
| battery for 12 hours. |
| • Clean charging contacts on handset and base |
| with a soft cloth, or an eraser. |
| • See solutions for “No dial tone.” |
| • Replace battery. |
Memory Dialing | • Did you program the memory location keys |
| correctly? |
| • Did you follow the proper dialing sequence? |
| • Make sure TONE/PULSE switch is correctly set. |
| • Did you reprogram numbers into memory after |
| power outage or replacing battery? |
BATTERY
If you experience any of the following problems, even after fully recharg- ing the battery, you may need to replace the battery pack:
•Short talk time
•Poor sound quality
•Limited range
•CHARGE/IN USE light fails to light
2 6
