Southwing SH315 Muting the microphone, Automatic call pick up, Transferring a call to the phone

Light flashes 3 times per second for 3 seconds (a series of 10 beeps will be heard). Do the same to return to the main menu (all the settings of extend- ed menu functions will be lost). With the extended menu functions you can do the following:

Muting the microphone

During a call, briefly press the Push4TM Button [2] twice. A tone will be heard every 2 seconds during the call to remind you that the microphone is muted. Two additional presses of the Push4TM Button will reactivate the microphone.

sound when remaining talk-time falls below ten minutes.

Pressing the button once more, you will return to normal mode.

Automatic call pick up

If you wish to have all of your calls accepted automatically (without any button presses), you can enable the automatic call pick up mode. To acti- vate this mode, briefly press the Vol+[4] and Push4TM [2] Buttons. When you receive an incoming call, your headset will automatically answer the call after 2 seconds. To turn off the automatic call pick up, just follow the same steps.

Transferring a call to the phone*

Press the Push4TM Button 3 times dur- ing a call to transfer the call to the mobile phone. Pressing the Push4TM Button [2] once again will transfer the call back to the Headset.

Last number redialling*

Press Push4TM Button twice to make your phone redial the last number called.

Battery Level Indicator

You can check the battery level at any time. With the Headset switched on, if you press the Push4TM Button 4 times, you will repeatedly hear a battery level indication:

·4 tones for a remaining talk-time over

4 hours.

·3 tones for a remaining talk-time around 3 hours.

·2 tones for a remaining talk-time around 2 hours.

·1 tone for a remaining talk-time between ten minutes and approximate- ly 1 hour and a half.

·A warning tone (high-low-high) will

Selecting Ring Tones

Your Headset is programmed with 12 different ring tones from which you can choose.

With the Headset switched on, press and hold either the Vol+ [4] or Vol- [5] Button for about 5 seconds to enter the ring tone menu (you will also hear the current ring tone). Then follow these steps:

1.Press the Vol+ or Vol- Buttons to move up or down in the ring tone list

2.Press briefly the Push4TM Button once to select your ring tone

Please Note:

Some mobile phones will play their own ring tones over the headset, replacing the user selected ring tone from the Headset.

6

*The features marked with asterisk are only possible with Bluetooth phones supporting the Bluetooth® Hands-free profile. Today, most Bluetooth phones support this profile.