Southwing SH305, SH310, SH315 manual Wearing the Headset without the Ear Hook, General Usage

Wearing the Headset without the Ear Hook

You can wear the Headset without using the Ear Hook. To do so:

1.Rotate the Multi-function Arm [8] downwards, until it stays in your ear like a wired headset cable extension

2.Gently place the Speaker [6] into your ear canal

3.Finally find the most comfortable position by rotating the Headset for- ward and backward

Wearing the Headset with the Ear Hook

The Ear Hook may also be used for maximum comfort. To mount the ear hook, rotate the Multi-function Arm [8] upwards and slide it inside the Ear Hook [9] jack. To place it on your ear follow these steps:

1.Rotate the Ear Hook [9] slightly for- wards

2.Gently place the Speaker [6] into your ear canal

3.Rotate the Ear Hook [9] backwards and adjust it behind your ear

4.To switch from one ear to the other, simply rotate the Multi-function Arm [8] downwards and rotate the Ear Hook [9] to the opposite side

Clipping your Headset to your clothes

The Multi-function Arm can also be used to carry your Headset in several convenient ways (Ear Hook not mounted). To clip it to your clothes do the following:

1.Rotate the Multi-function Arm [8] to the same direction of the microphone [7]

2.Use the Multi-function Arm [8] and Headset Body as a clip to attach the Headset to your clothes

Using your Headset Cord to carry your Headset

The Headset Cord [10] can also be used to carry your Headset with your mobile phone (Ear Hook not mounted). To attach your Headset to the Headset Cord [10] follow these steps:

1.Rotate the Multi-function Arm [8] until it is in opposite direction of the Headset microphone [7]

2.Attach the Multi-function Arm [8] to the Headset Cord [10] jack

Changing colour covers (SH305 / SH310)

Your headset comes with interchange- able colour covers to suit your style. To change a colour cover, place your thumbnail on the cover end, close to the microphone and pull it out gently. Now you can fit the new colour cover.

4. GENERAL USAGE

Turning the Headset on and off

To turn the Headset on, press and hold the On/Off Button [3] for about 2 sec- onds until a series of tones is heard. The Indicator Light [2] will flicker for 1 second and start flashing.

To turn the Headset off, press and hold the On/Off Button [3] for about 2 sec- onds until a series of tones is heard. The Indicator Light will flash, before turning off.

Changing Volume

To increase the volume, with the Headset on, press Vol+ Button [4]. To decrease the volume, press the Vol- Button [5]. The Headset will remember all volume settings even when it is switched off.

4

*The features marked with an asterisk will only work with Bluetooth phones which support the Hands-free profile. Today, most Bluetooth phones support this profile.