Samsung SCX-4521FG manual Setting the Paper Size and Type, Speaker Volume

Setting the Paper Size and Type

After loading paper in the tray, you need to set the paper size and type using the control panel buttons. These settings will apply to copy and fax modes. For PC-printing, you need to select the paper size and type in the application program you use on your PC.

1Press Menu.

The display shows “Paper Setting” on the top line of the display.

2Press the scroll button ( or ) to display “Paper Size” on the bottom line and press Enter to access the menu item.

3Use the scroll button ( or ) to find the paper size you

are using and press Enter to save it.

4Press the button to scroll to “Paper Type” and press Enter to access the menu item.

5Use the scroll button ( or ) to find the paper type you are using and press Enter to save it.

6To return to Standby mode, press Stop/Clear.

Setting Sounds (Only for SCX-4521F)

You can control the following sounds:

•Speaker: You can turn on or off the sounds from the telephone line through the speaker, such as the dial tone or a fax tone. With this option set to “Comm.” the speaker is on until the remote machine answers.

•Ringer: You can adjust the ringer volume.

•Key Sound: With this option set to “On” a key tone sounds each time a key is pressed.

•Alarm Sound: You can turn the alarm sound on or off. With this option set to “On” an alarm tone sounds when an error occurs or fax communication ends.

•You can adjust the volume level using the On Hook Dial button.

Speaker, Ringer, Key Sound, and Alarm Sound

1Press Menu until “Sound/Volume” appears on the top line of the display.

2Press the scroll button ( or ) to scroll through the options. Press Enter when you see the desired sound option.

3Press the scroll button ( or ) to display the desired status or volume for the option you have selected.

You will see the selection on the bottom line of the display.

For the ringer volume, you can select “Off”, “Low”, “Med”, and “High”. Setting “Off” means that the ringer does not sound. The machine works normally even if the ringer is turned off.

4Press Enter to save the selection. The next sound option appears.

5If necessary, repeat steps 2 through 4.

6To return to Standby mode, press Stop/Clear.

Speaker Volume

1Press On Hook Dial. A dial tone sounds from the speaker.

2Press the scroll button ( or ) until you hear the volume you want. The display shows the current volume level.

3Press On Hook Dial to save the change and return to Standby mode.

NOTE: You can adjust the speaker volume only when the telephone line is connected.

2.11 Getting Started