Using the Save Modes, Setting the Dial Mode | Samsung SCX-4521FG

Using the Save Modes

Toner Save Mode

Toner Save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality.

To turn the toner save mode on or off, press Toner Save.

•If the button backlight is on, the mode is active and the machine uses less toner when printing a document.

•If the button backlight is off, the mode is deactivated and the machine prints with the normal quantity of toner.

NOTE: When PC-printing, you can also turn on or off the toner save mode in the printer properties. For details, see Software User’s Guide.

Power Save Mode

Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.

1Press Menu until “Machine Setup” appears on top line of the display.

2Press the scroll button ( or ) until “Power Save” appears on the bottom line. Press Enter.

3Press the scroll button ( or ) to display “On” on the bottom line and press Enter.

Selecting “Off” means that the power save mode is deactivated.

4Press the scroll button ( or ) until the time setting you want appears.

The available options are 5, 10, 15, 30, and 45 (minutes).

5Press Enter to save the selection.

6To return to Standby mode, press Stop/Clear.

Setting the Dial Mode

(Only for SCX-4521F)

You can select the type of the telephone dial system where your

machine is connected.

NOTE: The Dial Mode setting may be unavailable depending on your country.

1Press Menu until “Machine Setup” appears on the top line of the display.

2Press the scroll button ( or ) until you see “Dial Mode” on the bottom line and press Enter.

3Press the scroll button ( or ) to select the desired dial mode.

Select “Tone” if your machine is connected to a tone dial line.

Select “Pulse” if the machine is connected to a pulse dial line.

4Press Enter to save the selection.

5To return to Standby Mode, press Stop/Clear.

2.12 Getting Started

Image 26

Samsung SCX-4521FG manual Using the Save Modes, Setting the Dial Mode, Toner Save Mode, Power Save Mode

Contents

Page About the User’s Guide Contact Samsung worldwide Slovakia Contents Printing a Document Canceling a Print Job Scanning Cleaning the Drum Clearing the Memory Ozone Safety Important Precautions and Safety InformationLaser Safety Statement Use only No.26 AWG or larger telephone line cord Recycling Mercury SafetyPower Saver Radio Frequency Emissions Replacing the Fitted Plug for UK Only Ringer Equivalence NumberDeclaration of Conformity European Countries You should also know that Neutral Wires in the mains lead have the following color codeDifferences Between British and American English British English American English Special Features Introduction These are the main components of your machine Understanding Component LocationsFront View Rear View Control Panel Functions Getting Started Unpacking Clearance Space Installing the Toner CartridgeSelecting a Location Left 3.9 in./100 mm enough space for ventilation Loading Paper If you have SCX-4321 Making ConnectionsLoad paper with the print side facing up Skip this step and proceed to step To an extension phone or answering machine Turning the Machine On Macintosh Driver Installing Printer SoftwarePrograms for Windows Linux Driver Linux Printer Driver FeaturesMacintosh Setting Country Setting the Machine IDSetting Language Entering Characters Using the Number Keypad Keypad Letters and Numbers Setting the Date and TimeChanging the Clock Mode Changing Numbers or Names Press On Hook Dial. a dial tone sounds from the speaker Setting the Paper Size and TypeSpeaker Volume Toner Save Mode Using the Save ModesSetting the Dial Mode Power Save Mode Paper Type, Input Sources, and Capacities Paper HandlingSelecting Print Materials Paper Type Input Tray/Capacity Guidelines for Paper and Special Materials Verifying an Output Location Using the TrayUsing the Manual Tray Tray holds 150 sheets of paper Preparing a Document CopyingLoading Paper for Copying Making Copies from the Automatic Document Feeder Adjust the document guides to the document sizeMaking Copies on the Document Glass Load the document face up into the ADF Automatic Original Type Setting Copy OptionsDarkness Reduced/Enlarged Copy Collation Copying Using Special Copy FeaturesClone Copying Auto Fit Copying Poster Copying ID Card CopyingUp or 4 Up Copying Setting the Favorite Copy Option Changing the Default SettingsSetting the Time Out Option Basic Printing Canceling a Print JobPrinting a Document Canceling a Print Job Printing a Document Scanning Scanning Basics Option Description Changing the Fax Setup optionsAvailable Fax Setup Options For more information about using the code On, Off, and On-Err, which prints only when aWill be discarded. Settings range from 0 to 30 mm Drpd Mode on To fax a document from the document glass To fax a document using the Automatic Document Feeder ADFLoading a Document Sending a Fax Automatically Adjusting the Document ResolutionMode Recommended for Confirming Transmission Sending a Fax ManuallyRedialing the Last Number Automatic Redialing Receiving Automatically in Ans/ Fax Mode Receiving Automatically in Fax ModeReceiving Manually in Tel Mode About Receiving Modes Receiving Faxes in the Memory Receiving Manually Using an Extension TelephoneReceiving Faxes Using the Drpd Mode Speed Dialing Sending a Fax using a Speed Dial NumberSetting a Group Dial Number Group Dialing Searching Sequentially through the Memory Searching for a Number in MemoryEditing Group Dial Numbers Press Phone Book Searching with a Particular First Letter Printing a Phonebook ListSending Broadcast Faxes If you do not want to assign a name, skip this step Sending a Delayed FaxSending a Priority Fax Canceling a Scheduled Fax Adding Documents To a Scheduled Fax Using Secure Receiving Mode Printing Reports Advanced Fax Setting Options Using Advanced Fax SettingsChanging Setting Options Power Failure Report Maintenance Clearing the Memory Cleaning the Outside Setting the Machine to be Checked by PhoneCleaning Your Machine Cleaning the Inside Toner cartridge storage Cleaning the Scan UnitMaintaining the Toner Cartridge Saving toner Replacing the Toner Cartridge Setting the Notify Toner OptionRedistributing Toner Items Yield Average Cleaning the DrumIgnoring the Toner Empty Message Replacing the ADF Rubber Pad Input Misfeed TroubleshootingClearing Document Jams Tray Clearing Paper JamsExit Misfeed Manual Tray Fuser Area or Around the Toner Cartridge Paper Exit Area Tips for Avoiding Paper Jams Clearing LCD Error MessagesDisplay Meaning Suggested solutions Power Failure Power has turned off Open Heat ErrorService Persists, please call for Condition Suggested solutions Solving Other ProblemsPaper Feeding Problems Stop/Clear Details, see Software User’s Printing ProblemsCondition Possible cause Suggested solutions Guide Printing Quality Problems Condition Copying Problems Scanning Problems Common Linux Problems Problem Possible Cause and Solution Software. See Software User’s Guide Common Macintosh ProblemsProblems in Printer Setup Utility Specifications General Specifications Scanner and Copier Specifications Printer Specifications Using only ITU-T No.1 Chart Facsimile SpecificationsPaper Specifications Overview Symptom Problem with Paper Solution Guidelines for Using PaperPaper Dimensions Weight Capacity Supported Sizes of Paper Paper Storage Environment Paper SpecificationsPaper Output Capacity Envelopes Envelope Margins Envelopes with Double Side SeamsEnvelopes with Adhesive Strips or Flaps Envelope Storage Error messages 9.4 extension phone, connect Index Reduced/enlarged copying System requirements Windows Software section Contents Sharing the Printer Locally Using Your Printer with a Macintosh Installing Printer Software in Windows Installing Printer Software in Windows Installing Printer Software in Windows Removing Printer Software Reinstalling Printer SoftwareSelect the components you want to reinstall and click Next Select your printer driver from the Name drop-down list Means you can select that certain option but it is notRecommended, Select Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Paper Orientation Layout TabPaper Tab Source Graphics Tab ResolutionToner Save Mode Scaling Printing Printer Tab Extras TabAbout Tab High Altitude Correction Using a Favorite Setting Using Help Advanced Printing Printing Multiple Pages on One Sheet of Paper N-Up Printing Fitting Your Document to a Selected Paper Size Printing PostersPrinting a Reduced or Enlarged Document Creating a Watermark Using WatermarksUsing an Existing Watermark Editing a Watermark Using a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page Overlay Sharing the Printer Locally Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer box Understanding Smart Panel Using Smart PanelOpening the Troubleshooting Guide Toner Level Changing the Smart Panel Program Settings Using Samsung SmarThru Scanning Using Samsung SmarThruUninstalling Samsung SmarThru Using Onscreen Help File Windows XP Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Windows Vista Installing the Unified Linux Driver Using Your Printer in LinuxInstalling the Unified Linux Driver When the welcome screen appears, click Next Click Next Click Finish Uninstalling the Unified Linux DriverClick Uninstall Opening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Printers Tab Classes Tab Scanners ConfigurationPorts Configuration Sharing Ports Between Printers and Scanners Change the printer and print job properties Configuring Printer PropertiesPrinting from Applications Click Properties Scanning a DocumentPrinting Files Using the Image Manager Adding Job Type Settings Tools Function You can use the following tools to edit the image Installing the Printer driver Using Your Printer with a MacintoshInstalling Software Uninstalling the Printer driver For a USB-connected Setting Up the PrinterFor a Network-connected Click Add on the Printer List Printing a Document Changing Printer SettingsPrinting Layout Graphics Paper Printing Multiple Pages on One Sheet of Paper You can scan docoments using Image Capture. Macintosh OSScanning Offers Image Capture Linux 27 printer properties, set Macintosh Uninstall, software Macintosh 31 Windows Rev.7.00