Exit Misfeed

1Remove any remaining page(s) from the ADF.

2Open the ADF cover.

3Remove the misfed documents from the document output tray.

4Close the ADF cover. Then load the removed page(s), if any, back into the ADF.

Clearing Paper Jams

When a paper jam occurs, “Paper Jam” appears on the display. Refer to the table below to locate and clear the paper jam.

Message

Location of Jam

Go to

 

 

 

[Paper Jam 0]

In the tray or manual

page 9.2

Open/Close Door

tray

 

 

 

 

[Paper Jam 1]

In the fuser area or

page 9.3

Open/Close Door

around the toner

 

 

cartridge.

 

 

 

 

[Paper Jam 2]

In the paper exit area

page 9.3

Check Inside

 

 

 

 

 

To avoid tearing the paper, pull out the jammed paper gently and slowly. Follow the instructions in the following sections to clear the jam.

In the Tray

1Remove the jammed paper in the tray by gently pulling it straight out.

If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, check the fuser area around the toner cartridge. See page 9.3.

2Open and close the front door to resume printing.

In the Manual Tray

1Remove the jammed paper in the tray by gently pulling it straight out.

If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, check the fuser area around the toner cartridge. See page 9.3.

2Open and close the front door to resume printing.

9.2 Troubleshooting

Page 59
Image 59
Samsung SCX-4521FG manual Clearing Paper Jams, Exit Misfeed, Manual Tray, Message Location of Jam Go to