SOYO Super 7 Mainboard, SY-5EHM/5EH5 manual ECP Mode Use DMA, Parallel Port EPP Type EPP Version

BIOS Setup Utility		SY-5EHM/5EH5
3-8.4 Onboard Parallel Ports
IR Pins Controls	Setting	Description	Note
IR Duplex mode	Half	Select the IR mode	Default
	Full	your IR module
		supports

Use IR Pins

IR-RX2TX2	Default
IR-RX TX

3-8.5 Onboard Parallel Ports

Onboard Parallel	Setting	Description	Note
Ports
Onboard Parallel	378	Choose the printer I/O	Default
Port	Disabled	address.
	3BC
	278

Parallel Port Mode

ECP + EPP

Normal

EPP

ECP

The mode depends on your external device Default that connects to this port.

If [Parallel Port Mode] is set to [ECP] or [ECP+EPP].

ECP Mode Use DMA

3	Choose DMA3	Default
1	Choose DMA1

If [Parallel Port Mode] is set to [EPP] or [ECP+EPP].

Parallel Port EPP Type (EPP Version)

EPP1.9	Choose EPP Ver. 1.9	Default
EPP1.7	Choose EPP Ver. 1.7

62