BIOS Setup Utility SY-7ISA+
70
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled Turn off the on-board
IDE
On-Chip PCI IDE
Ø Primary
Ø Secondary Enabled Use the on-board IDE Default
mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø Secondary Slave PIO
Auto For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing.
Default
Disabled
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Auto Select Auto to enable
Ultra DMA Mode
support.
Default
3-5.2 Keyboard Controls
Keyboard Controls Setting Description Note
Disabled
USB Controller Enabled Select Enabled if your system
contains a Universal Serial Bus
(USB) controller and you have
USB peripherals.
Default
Disabled Turn off the on-board IDE Default
USB Keyboard
Support Enabled Use a USB keyboard
PCI Slot Default
Init Display First AGP Choose which card – AGP
Display card or PCI VGA card –
to initialize first.