BIOS Setup Utility SY-K7ADA
62
3-4 INTEGRATED PERIPHERALS
Caution: Change these settings only if you are already familiar
with the Chipset.
The [INTEGRATED PERIPHERALS] option changes the values of the
chipset registers. These registers control the system options in the computer.
The following screen shows setup default settings.
CMOS Setup Utility Copyright ( C ) 1984-2001 Award Software
Integrated Peripherals
On-Chip Primary IDE Enabled 5
Master PIO Auto Item Help
Slave PIO Auto
Master Ultra DMA Auto
Slave Ultra DMA Auto
On-Chip Secondary IDE Enabled
Master PIO Auto
Slave PIO Auto
Master Ultra DMA Auto
Slave Ultra DMA Auto
On-Chip USB Controller Enabled
USB Keyboard Support Disabled
Init Display First AGP
IDE HDD Block Mode Enabled
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
Onboard Serial Port 3 Disabled
xUART Mode Select IrDA
xRxD , TxD Active Hi, Lo
xIR Duplex Mode Half
xFast IR Mode Use DMA 1
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
xECP Mode Use DMA 3
6
Menu Level 4
áâàß:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults