Hardware Installation SY-K7ADA
17
2-3.1 CPU Installation
Your SY-K7ADA motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 462 CPU
connector on the motherboard.
Mark your CPU Frequency:
Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
200MHz FSB DDR transfer on Athlon
750 MHz (100 x 7.5) 800 MHz (100 x 8.0) 850 MHz (100 x 8.5) 900 MHz (100 x 9.0)
950 MHz (100 x 9.5) 1000 MHz (100 x 10.0) 1.1GHz (100 x 11.0) 1.2GHz(100 x 12.0)
200MHz FSB DDR transfer on Duron
600 MHz (100 x 6.0) 650 MHz (100 x 6.5) 700 MHz (100 x 7.0) 750 MHz (100 x 7.5) 800 MHz (100 x 8.0)
850 MHz (100 x 8.5)
266MHz Front Side Bus DDR transfer on Athlon
1 GHz (133 x 7.5) 1.13 GHz (133 x 8.5) 1.2 GHz (133 x 9.0)
Follow these instructions to install your Socket 462 processor correctly.
1. Lift the socket handle up to a vertical position.