SOYO SY-K7VTA, PRO V1.0 Motherboard Configure Memory, NumberofMemoryModules, MemoryModuleSizeMB

Hardware Installation

SY-K7VTA PRO V1.0 Quick Start Guide

Step 4. Configure Memory

Supports PC133/ PC100 SDRAM and Virtual Channel Memory (VCM) SDRAM up to 3 DIMMs and using system memory up to 1.5GB.

Memory Configuration Table

NumberofMemoryModules	DIMM 1		DIMM2	DIMM3
RAMType		SDRAM/ VCMSDRAM
MemoryModuleSize(MB)
		32/64/128/256/512MB

How to Clear CMOS Data(JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory.

1.Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white colored cap can easily identify this jumper.

2.Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOSClearing	ClearCMOSData			RetainCMOSData
	Shortpin2-3for			Shortpin1-2toretain
JP5Setting	atleast5secondstoclear			newsettings
	theCMOS
	1	2	3	1	2	3

Note:You must unplug theATX power cable from theATX power connector when performing the CMOS Clear operation.

12