Spalding 211014 manual Face of Backboard

2. Remove packaging materials from handle assemblies (P-10 and P-11).

P-11

Remove screws on both sides of tube.

P-10

3. Slide upper tube (P11) onto handle assembly (P-10). Reinsert screws removed in previous step as shown.

P-11

P-10

Screws removed in step 2

NOTE:

Rotate upper tube to line up screw holes. Reinsert screws removed in previous step as shown.

4. Assemble brackets (P-21) to backboard using bolts (H-25) metal spacers (H-24) and nuts (H-26) as shown. The spacers may fit very tightly between the brackets and may need to be tapped gently into place with a hammer.

	H-24
P-21		P-21

H-25 H-26

Face of Backboard P-21

H-24

H-26

H-24

H-26

H-25

H-25

21 03/05 P/N 211014