Spalding 211014 manual Clip ARM

12. Install net clips (H-28).

CLIP “ARM”

WARNING!

USE OF THIS PRODUCT WITHOUT PROPER INSTALLATION OF SMART CLIPS®, OR WHEN ALL SMART CLIPS® ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY.

H-28

CLIP “BODY”

H-28

A

Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown.

Push in direction indicated by arrows.

Push second “arm” back and into ram as shown.

B

Twist “body” of clip slightly again to spread “arms” of clip.

Clip “arms” must be flat and touching edge-to-edge as shown, without overlapping.

C

27 03/05 P/N 211014