Spalding 211014 manual Do not Over

6.		7.
	Secure ends of tank struts (P-13) to tank using
			Install upper pivot bracket (P-14) to front of base
	bolt (H-21), washers (H-4) and nut (H-11) as		using bolt (H-8), washer (H-9) and nut (H-26) as
	shown. Repeat for opposite side.		shown.

H-21

P-13

H-4 H-26

H-9

	WARNING!	P-14
	TWO PEOPLE REQUIRED
	FOR THIS PROCEDURE.
H-4	FAILURE TO FOLLOW THIS	H-8
	WARNING COULD RESULT IN
	SERIOUS INJURY AND/OR
H-11	PROPERTY DAMAGE.

Insert bolt (H-10) through lower pivot bracket (P-15) as shown; bolt (H-10) will be secured in step 11.

8. Carefully place base assembly on its side. Install lower pivot bracket (P-15) with bolt (H-12), washers (H-9), and lock nut (H-26) as shown.

P-14

H-10

H-9

H-26

IMPORTANT!

DO NOT OVER

TIGHTEN

H-12

H-9

P-15

P/N 211014 03/05 16