4. Bounce top and middle pole assembly (4 and 5) onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the pole identification mark on the bottom pole.
IMPORTANT!
Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
Dimple |
Trough |
1.5” (3.81 cm) |
Bottom pole |
5” |
(12.7 cm) |
ID STICKER |
Bottom pole
DIMPLE
HOLE
4
5
6
RODS SHOWN ARE FOR
VISUAL REPRESENTATION OF
ALIGNMENT AND ARE NOT
SUPPLIED WITH THE
HARDWARE
Wood Scrap
(not supplied)
ID# M682001 | 12/06 | 10 |
